Iscar is introducing Penta 34 carbide inserts having a completely new PB chipformer. The PB chipformer incorporates a single cavity utilizing a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a varying frontal edge.
The completely new chipformer was developed for machining soft materials. It is an remarkable solution for parting bearing steel and other very ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.
The combination of the unique chipformer and IC908 grade provides superior chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the flexible IC908 PVD coated grade. The revolutionary family extends the application range of Iscar's utmost practical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when examined to a competitor's tool, is a winning solution for machining all soft and ductile material.
Iscar's Upgrades for Parting
Iscar has developed a revolutionary family of reinforced Tang-Grip blades for the prominent TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced fabrication, can be used in long overhang. Only the part of the blade imperative for penetration (cutting depth) has a reduced width. The remainder is thick, which provides upgraded rigidity and stiffness. These blades are an excellent solution for parting and grooving between the main and sub-spindle of turn/mill machines. The single-ended insert has a extraordinarily rigid clamping and therefore provides a tremendously valuable advantage over any other system.
Further additions to Iscar's Grip family are Do-Grip carbide inserts manufactured from the new Sumo Tec carbide grades: IC807 IC808 and IC830. The unique Sumo Tec grades extremely increase insert life, due to the most advanced coating technology followed by a special surface treatment. This also provides bettered tool life due to lowered surface stress and an uniformly coated top surface. The level surface contributes to smooth uninterrupted chip flow, less produced heat and less friction. The new process increases toughness and chipping resistance and thus lowers friction and built-up edge. This in turn increases and prolongs tool life at increased machining conditions for all types of work piece materials. The new PVD process is fashioned of Iscar's AL-TEC coating technology, employing the unique surface treatment.
Iscar's Chip Splitting Inserts
Iscar's revolutionary HM90 APCR 220605-CS grooved carbide inserts put an end to chip crowding problems in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts styled specially for aluminum milling. With 2 grooves pressed into each polished cutting face, the inserts split aluminum chips into a manageable size for easy, constant evacuation despite the application's characteristic raised chip volume. The 22 mm inserts, each with 2 edges, are designed to expand metal removal over the full range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work particularly well with Iscar's revolutionary HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and reduce chatter in long-overhang setups. The inserts feature a cavity on the bottom to ensure correct mounting in cutter chip pockets furnished with conventional spring pins. For optimal chip control, Iscar endorses using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.
The Latest In Carbide Endmill Architectures In A Extended And Successful Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Some Of The Many Advancements In Carbide Inserts Coming From Iscar From Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
Iscar Adds Their Latest Innovations To A Lengthy Line Of Prosperous Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
Iscar Announces A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Push Pull Testing For Highway Industry With Calibrated Gauges. Stress Load Testing Procedures For On Site Evidence To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Industrial Water Heater - Considering All Of Your Needs - Read Carefully In Order To Learn A Lot More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.
Obtaining Automotive Manufacturing Jobs And Starting A New Career.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.